How to connect two pigtails to a double-core leather cable?

1. First, peel off the outer skin of the cable to expose the fiber bundle inside. Be careful not to damage The Optical Fibers in the cable. Fiber strippers or cutting tools can be used to achieve this step.

2. Then, cut and peel off the outer protective layer of each optical fiber to expose the inner bare optical fiber. Ensure that the bare fiber length of each Optical Fiber Is the same.

3. Next, insert the optical fiber connector into the connector on the pigtail. You can align the fiber connector with the connection port and gently rotate the connector until it is inserted smoothly.

4. Once inserted into the connector, tighten the optical fiber connector to ensure stable connection.

5. Finally, use a fiber tester to test the connected fiber to check whether the connection is successful. The quality of the connection can be confirmed by the display results of the tester.

It should be noted that in the process of fiber connection, the environment should be kept clean to avoid dust and pollutants entering the connection part, which helps to maintain the quality and stability of the connection. At the same time, handle the optical fibers gently to avoid excessive stretching or bending. Otherwise, the optical fibers may be damaged.